Hydraulic conductor tensioners
Home / Products / Overhead line construction / Hydraulic conductor tensioners / SA-YZ4x50 Hydraulic Tensioner
Overhead line construction
> Hydraulic conductor pullers
> Hydraulic conductor tensioners
> Stringing blocks
> Reel winder and reel stand
> Power Line Auxiliary devices for conductor installing
> Compressing and cutting device
> Gin Pole and Working Platforms
> Power Line Safety Tools and Accessories
Underground cables equpment & tool
> Cable puller and tensioner
> Cable roller
> Hydraulic Reel Elevator
> Cable Stripper and cutter
> Cable Installation Devices
OPGW stringing equipments
> OPGW puller and tensioner
> OPGW stringing block
> OPGW Installation Devices
Ningbo Eastern Grid Power (E-Grid) is China leader in designing, manufacturing and supplying hydraulic brake tensioners for stringing operations, ideal to allow operations to be carried out with the highest accuracy, speed and safety.
2 Hydraulic half-closed circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
The machine is provided with tension pre-setting system.
1.Two Hydraulic half-closed circuit that provides very sensitive tensioning control and negligible deviations of tension in case of speed change.
2. The machine is provided with tension pre-setting system.
2. Bull wheel with wear proof MC nylon lining segment
3. Closed hydraulic circuit and bi-directional variant plunger pump .infinitely variable pull/tension control
4. Rexroth pump and motor, Italian RR reducer ,model C attached reel winder .
5. Spring applied hydraulic released brake, overload protection is on the safe side and easy operation.
6. There is a hydraulic circuit for drive , matching DW2240 A reel stand
7. Negative self-acting hydraulic brake, in case of hydraulic failure ensure to safety.
8.Hydraulic dynamometer with set-point and automatic control of maximum pull, automatic overload protection.
9.Hydraulic oil cooling system
10.Mechanical meter counter.
11.Hydraulic power pack to control 1 drum stand with hydraulic motor or 1 reel winder.
12.Gearbox with 3 operating positions:
--neutral position(with free bull-wheels for conductor loading and unloading)
--Low tensioner position.
--nominal tension position
13.Mechanical actuated front plough stabilizer.
14.Grounding device on board.